IFT On-Size Mechanical Joint Linestop Sleeve
On-Size Mechanical Joint Linestop Sleeve
IFT uses a wide range of Linestop fittings to perform pipeline connections and isolations with our line stopping machines. Our experience welding and using these style fittings dates back to the origins of the design with our 37+ years of experience and counting. Our fittings work to get the job done right the 1st time.
Mechanical Joint Linestop SleeveThe IFT On-Size Mechanical Joint Linestop Sleeve Fitting is
typically fabricated to a specific outside diameter for your line. It is
constructed of carbon steel that is normally fusion epoxy coated and
assembled with stainless steel bolts and nuts. The advantage of this sleeve is seen primarily for cast iron pipe, A/C pipe, plastic pipe and other fragile pipelines that run the risk of beam breaks. The saddle is completely sealed at all points so if breakage occurs the product is sealed within the containment sleeve. MJ saddles are suggested on temperamental pipelines when the line stop nozzle exceeds 75% of the main size.
|
Units in box: 1
