12" Insert Valve Installation on Transite Pipeline in Santa Ana, California

12” Insert Valve Installation on Carbon Steel Pipeline in Santa Ana, California

Job Status: Successful and Completed
Job Date: November 18, 2015
JOB LOCATION: Santa Ana, CA.
PROJECT: 12" Insert Valve Installation

1- 12” Insert Valve Outdoor on Transite Pipe Water Main – Left Hand open
1 - Mobilization / Travel
1 - 12" Team Insert Valve for Transite Pipe  Water Main 150 PSI or less
1 - Installation of valve with pressure test

OR Call

Office hours 7:30 – 5:00 Central time

Nationwide: 1-800-221-3332

Emergency Services Available .

 

 

  • Turning down the 12" Insert Valve to fit the Pipe Exact OD

    Turning down the 12" Insert Valve to fit the Pipe Exact OD

  • Turning down the 12" Insert Valve with lathe to fit the Pipe Exact OD

    Turning down the 12" Insert Valve with lathe to fit the Pipe Exact OD

  • Lathe turning down the steel in the Insert Valve to fit exact pipeline outside diameter

    Lathe turning down the steel in the Insert Valve to fit exact pipeline outside diameter

  • Harrison prepping the 12" Transite pipe type for the team insert valve installation

    Harrison prepping the 12" Transite pipe type for the team insert valve installation

  • Insert valve body getting fitted under the pipe

    Insert valve body getting fitted under the pipe

  • Insert Valve top getting assembled to bottom of valve body

    Insert Valve top getting assembled to bottom of valve body

  • Insert Valve Top and Bottom Getting Bolted Together

    Insert Valve Top and Bottom Getting Bolted Together

  • Insert Valve temporary gate valve getting put in place for hottap

    Insert Valve temporary gate valve getting put in place for hottap

  • Bonnet is removed after Insert Valve is hex bolted to bottom

    Bonnet is removed after Insert Valve is hex bolted to bottom

  • 12" Insert Valve bonnet housing getting prepared for the hot tap by measuring travel distance

    12" Insert Valve bonnet housing getting prepared for the hot tap by measuring travel distance

  • Bolting up the T-37 hot tap machine in preparation for tap and coupon removal

    Bolting up the T-37 hot tap machine in preparation for tap and coupon removal

  • Another view of the www.2LBin.com T-37 hot tapping machine tapping for the Insert Valve Installation

    Another view of the www.2LBin.com T-37 hot tapping machine tapping for the Insert Valve Installation

  • Jason performing the 12" hot tap for this insert valve installation

    Jason performing the 12" hot tap for this insert valve installation

  • 12" coupon and entire section of pipe

    12" coupon and entire section of pipe

  • Insert Valve bonnet housing getting crain lifted to the flange

    Insert Valve bonnet housing getting crain lifted to the flange

  • IFT Engineers hard at work on the 12" California Job

    IFT Engineers hard at work on the 12" California Job

  • 12" bonnet bolted up to flange for install of Insert Valve top to complete job

    12" bonnet bolted up to flange for install of Insert Valve top to complete job

  • Bonnet is removed after the gate valve is closed

    Bonnet is removed after the gate valve is closed

  • 12" Insert Valve is successfully installed in Santa Ana, California

    12" Insert Valve is successfully installed in Santa Ana, California

  • Last phase in this Insert Valve installation job is adding concrete around valve to reinforce

    Last phase in this Insert Valve installation job is adding concrete around valve to reinforce

  • Concrete is evened out over the top of the pipeline and bottom of the Insert Valve

    Concrete is evened out over the top of the pipeline and bottom of the Insert Valve

  • Santa Ana, California 12" Team Insert Valve installation is complete

    Santa Ana, California 12" Team Insert Valve installation is complete

12" Insert Valve Installation on Transite Pipe in Santa Ana, California